Description
The Pentair Dominator 5″ 140/65 M (code 319-1060) is a manual stainless steel multistage submersible pump, the high-flow model in the 230v Dominator 5″ range. Seven stages and a 1.1 kW motor give 63 metres of head at 20 litres per minute, 42 metres at 80 l/min and 33 metres at 100 l/min, with a maximum flow of 140 l/min at 13 metres. It runs on 230v single-phase mains, draws 7.2 A and delivers through a 1¼” female outlet.
With no level switch, it runs whenever it has power, which suits a system with its own pressure switch, timer or level controls. The Dominator 5″ 140/65 M Automatic is the same pump with a float switch. If your demand stays below about 50 l/min, the smaller Dominator 5″ 70/50 M draws less current.
The pump body, suction screen, impellers, diffusers and shaft are AISI 304 stainless steel, and the mechanical seal is graphite against aluminium oxide, running in an oil chamber. The sealed dry motor is IP68 rated with Class F insulation, runs at 2850 rpm and is cooled by the water it pumps, with the capacitor and a thermal cut-out built in. Pentair rates it for continuous duty.
The 140/65 M is 550 mm long and 132 mm in diameter, and weighs 15.8 kg.
Features
- 63 m head at 20 l/min, 42 m at 80 l/min, up to 140 l/min
- Seven stages, 1.1 kW motor, 230v single-phase, 7.2 A
- Manual operation for use with your own controls
- AISI 304 stainless steel body, impellers, diffusers and shaft
- IP68 motor with built-in capacitor and thermal protection
- 1¼” female outlet, 20 metre power cable
- 550 mm long, 132 mm diameter, 15.8 kg
Applications
- Larger garden and smallholding irrigation
- Water supply from a well to a property with several outlets
- Lifting water a long way uphill or to a raised tank
- Gravity irrigation systems fed from a header tank
For clean water only, up to 40°C, with no suspended solids or abrasive material, so it is not a drainage pump or a pump for sandy bores. At 132 mm across it is wider than a 5-inch (127 mm) borehole; for a 4-inch bore, see the Pentair Dominator 4″ well pumps. Pentair rates it for up to 17 metres below the water level.

The Pentair Dominator 5″ range
| Model | Control | Motor P2 (kW) | Current (A) | Stages | Head at 20 l/min (m) | Max flow (l/min) | Length x Dia (mm) | Kg | Code |
|---|---|---|---|---|---|---|---|---|---|
| Dominator 5″ 70/50 M | Manual | 0.6 | 4.0 | 6 | 48 | 60 | 475 x 132 | 13.7 | 319-1000 |
| Dominator 5″ 70/50 M Automatic | Float switch | 0.6 | 4.0 | 6 | 48 | 60 | 475 x 132 | 13.7 | 319-1010 |
| Dominator 5″ 140/65 M | Manual | 1.1 | 7.2 | 7 | 63 | 140 | 550 x 132 | 15.8 | 319-1060 |
| Dominator 5″ 140/65 M Automatic | Float switch | 1.1 | 7.2 | 7 | 63 | 140 | 550 x 132 | 15.8 | 319-1070 |
All four models are 230v single-phase with a 1¼” female outlet and 20 m power cable. See the Pentair Dominator 5″ range page for help choosing a model and answers to common questions.









Reviews
There are no reviews yet.