Description
The Pentair Dominator 5″ 70/50 M (code 319-1000) is a manual stainless steel multistage submersible pump for lifting clean water from wells, tanks and clean watercourses. Its six-stage hydraulics and 0.6 kW motor give 48 metres of head at 20 litres per minute and 35 metres at 40 l/min, with a maximum flow of 60 l/min at 17 metres. It runs on 230v single-phase mains, draws 4.0 A and delivers through a 1¼” female outlet.
As the manual version, it has no level switch and runs whenever it has power, so it suits installations where you control the pump yourself or through a separate pressure switch or level control. If you want the pump to start and stop with the water level, the Dominator 5″ 70/50 M Automatic is the same pump with a float switch.
The pump body, suction screen, impellers, diffusers and shaft are AISI 304 stainless steel, and the mechanical seal is graphite against aluminium oxide, running in an oil chamber. The sealed dry motor is IP68 rated with Class F insulation, runs at 2850 rpm and is cooled by the water it pumps, with the capacitor and a thermal cut-out built in. Pentair rates it for continuous duty.
The 70/50 M is 475 mm long and 132 mm in diameter, and weighs 13.7 kg.
Features
- 48 m head at 20 l/min, 35 m at 40 l/min, up to 60 l/min
- Six stages, 0.6 kW motor, 230v single-phase, 4.0 A
- Manual operation for use with your own controls
- AISI 304 stainless steel body, impellers, diffusers and shaft
- IP68 motor with built-in capacitor and thermal protection
- 1¼” female outlet, 20 metre power cable
- 475 mm long, 132 mm diameter, 13.7 kg
Applications
- Water supply from a dug or lined well
- Filling a tank that feeds a domestic pressure system
- Small automatic garden irrigation
- Clean water from ponds, streams and storage tanks
For clean water only, up to 40°C, with no suspended solids or abrasive material, so it is not a drainage pump or a pump for sandy bores. At 132 mm across it is wider than a 5-inch (127 mm) borehole; for a 4-inch bore, see the Matra Venus borehole pumps. Pentair rates it for up to 17 metres below the water level.

The Pentair Dominator 5″ range
| Model | Control | Motor P2 (kW) | Current (A) | Stages | Head at 20 l/min (m) | Max flow (l/min) | Length x Dia (mm) | Kg | Code |
|---|---|---|---|---|---|---|---|---|---|
| Dominator 5″ 70/50 M | Manual | 0.6 | 4.0 | 6 | 48 | 60 | 475 x 132 | 13.7 | 319-1000 |
| Dominator 5″ 70/50 M Automatic | Float switch | 0.6 | 4.0 | 6 | 48 | 60 | 475 x 132 | 13.7 | 319-1010 |
| Dominator 5″ 140/65 M (no longer available) | Manual | 1.1 | 7.2 | 7 | 63 | 140 | 550 x 132 | 15.8 | 319-1060 |
| Dominator 5″ 140/65 M Automatic (no longer available) | Float switch | 1.1 | 7.2 | 7 | 63 | 140 | 550 x 132 | 15.8 | 319-1070 |
All four models are 230v single-phase with a 1¼” female outlet and 20 m power cable. See the Pentair Dominator 5″ range page for help choosing a model and answers to common questions.









Reviews
There are no reviews yet.