Well Buddy 1000A

Plastic multistage submersible pump with stainless steel casing and automatic float switch, 230v. Up to 110 l/min and 45 m head (4.5 bar) from a 1.0 kW motor, 1″ BSP outlet. Supplied with a 10 m cable and stepped hosetail, for clean water only.

£133.30 +VAT
£159.96 incl VAT

in stock

Free UK delivery
on orders over £200

Need advice?
01252 515169

SKU: 022-950 Categories: ,

Description

The Well Buddy 1000A (code 022-950) is a plastic multistage submersible pump with a stainless steel casing and an automatic float switch, for clean water from wells, springs, clean rivers and storage tanks. It delivers up to 110 litres per minute and a maximum head of 45 metres (4.5 bar) from a 1.0 kW motor, through a 1″ BSP outlet, on standard 230v single-phase mains.

The tethered float starts the pump as the water rises and stops it as the level falls, so the 1000A suits emptying a tank, transferring water between tanks or drawing down a well without leaving the pump running once the water has gone. If you want the pump to run whenever a tap or sprinkler is opened instead, the Well Buddy 1000P has the same 4-stage design with a built-in pressure control switch. For more flow or a 110v supply, the JS-530 Well Buddy is a separate JS Pumps range with a 1.3 kW motor, rated to 140 l/min.

Inside, four plastic impeller stages are stacked in a stainless steel casing. Stacking stages is what lets a 1.0 kW motor reach 45 metres of head, at the cost of some volume compared with a single-impeller drainage pump. The 1″ BSP outlet comes with a stepped hosetail that takes 1″ hose, ¾” hose or a ¾” threaded fitting.

The 1000A is 438 mm tall and 151 mm in diameter, weighs 11 kg, draws 4.5 A and comes with a 10 metre power cable.

Features

  • Up to 110 l/min and 45 m head (4.5 bar)
  • Four plastic impeller stages in a stainless steel casing
  • Automatic tethered float switch
  • 1.0 kW motor, 230v single-phase, 4.5 A
  • 1″ BSP outlet with stepped hosetail (1″ hose, ¾” hose or ¾” thread)
  • 10 metre power cable
  • 11 kg, 151 mm diameter

Applications

  • Garden watering and sprinklers from a well, spring or tank
  • Emptying and transferring water between storage tanks
  • Rainwater tanks
  • Pumping clean water over long hose runs or up to higher ground

For clean water only, with no suspended solids or abrasive material. It is not a drainage or dirty water pump, and at 151 mm across it will not fit a standard 4-inch or 5-inch borehole.

Well Buddy 1000A performance curve, head in metres against flow in litres per minute

The Well Buddy range

ModelControlMax Flow (l/min)Max Head (m)Motor (kW)Current (A)Cable (m)H x W x L (mm)KgCode
Well Buddy 1000AFloat switch110451.04.510438 x 151 x 15111022-950
Well Buddy 1000PPressure control100451.04.915535 x 150 x 15013022-952

Both models are 230v single-phase with a 1″ BSP outlet and a stepped hosetail. See the Well Buddy range page for help choosing between them and answers to common questions.

Additional information

Voltage

230v

Flow Rate

101 – 150 l/min

Max Head

41- 50m

Material

Plastic, Stainless Steel

Liquid Type

Clean Water

Downloads

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Delivery Information

Delivery
We offer free next working day delivery to any UK address on all orders over the value of £200+VAT if ordered before 3pm on weekdays excluding bank holidays. Delivery on orders below this amount is charged at £15+VAT.
For more information please see our Terms and Conditions

Recommended accessories

You may also need

Free, independent advice

Need help choosing? Ask our team

Not sure it is the right pump or motor for the job? Send us a question and our team will reply, or call us now. We have been supplying, repairing and rewinding pumps since 1948.

Monday to Friday, 8.30am to 5.30pm

Send us a question

We reply within one working day.

Loading cart