Description
The Pentair Dominator 5″ 70/50 M Automatic (code 319-1010) is a stainless steel multistage submersible pump with a float switch, for clean water from wells, tanks and clean watercourses. It gives 48 metres of head at 20 litres per minute and 35 metres at 40 l/min, up to a maximum of 60 l/min at 17 metres, from a 0.6 kW motor. It runs on 230v single-phase mains, draws 4.0 A and has a 1¼” female outlet.
The float switch starts the pump as the water rises and stops it as the level falls, so the pump does not keep running once the well or tank has been drawn down. The Dominator 5″ 70/50 M is the same pump without the switch, for use with your own controls.
The pump body, suction screen, impellers, diffusers and shaft are AISI 304 stainless steel, and the mechanical seal is graphite against aluminium oxide, running in an oil chamber. The sealed dry motor is IP68 rated with Class F insulation, runs at 2850 rpm and is cooled by the water it pumps, with the capacitor and a thermal cut-out built in. Pentair rates it for continuous duty.
Like the manual model, the 70/50 M Automatic is 475 mm long, 132 mm in diameter and weighs 13.7 kg, with six stages.
Features
- Float switch starts and stops the pump with the water level
- 48 m head at 20 l/min, 35 m at 40 l/min, up to 60 l/min
- Six stages, 0.6 kW motor, 230v single-phase, 4.0 A
- AISI 304 stainless steel body, impellers, diffusers and shaft
- IP68 motor with built-in capacitor and thermal protection
- 1¼” female outlet, 20 metre power cable
- 475 mm long, 132 mm diameter, 13.7 kg
Applications
- Emptying or transferring water from a well or storage tank
- Filling a raised tank from a well or spring
- Small automatic garden irrigation
- Rainwater and clean pond water
For clean water only, up to 40°C, with no suspended solids or abrasive material, so it is not a drainage pump or a pump for sandy bores. At 132 mm across it is wider than a 5-inch (127 mm) borehole; for a 4-inch bore, see the Matra Venus borehole pumps. Pentair rates it for up to 17 metres below the water level. The float needs space to rise and fall, so this version suits open wells, tanks and sumps rather than a tight bore.

The Pentair Dominator 5″ range
| Model | Control | Motor P2 (kW) | Current (A) | Stages | Head at 20 l/min (m) | Max flow (l/min) | Length x Dia (mm) | Kg | Code |
|---|---|---|---|---|---|---|---|---|---|
| Dominator 5″ 70/50 M | Manual | 0.6 | 4.0 | 6 | 48 | 60 | 475 x 132 | 13.7 | 319-1000 |
| Dominator 5″ 70/50 M Automatic | Float switch | 0.6 | 4.0 | 6 | 48 | 60 | 475 x 132 | 13.7 | 319-1010 |
| Dominator 5″ 140/65 M (no longer available) | Manual | 1.1 | 7.2 | 7 | 63 | 140 | 550 x 132 | 15.8 | 319-1060 |
| Dominator 5″ 140/65 M Automatic (no longer available) | Float switch | 1.1 | 7.2 | 7 | 63 | 140 | 550 x 132 | 15.8 | 319-1070 |
All four models are 230v single-phase with a 1¼” female outlet and 20 m power cable. See the Pentair Dominator 5″ range page for help choosing a model and answers to common questions.








Reviews
There are no reviews yet.