Pentair Swimmey 15M 230v Centrifugal Swimming Pool Pump

Description

The Pentair Swimmey 15M 230v (code 014-012) is a self-priming swimming pool pump with a built-in pre-filter, designed for filtering and circulating chlorine-treated pool water. It delivers up to 250 litres per minute (about 15 m³/h) from a 0.5 kW (0.75 HP) motor, runs on standard 230v single-phase mains and has DN 50 suction and delivery connections. It sits one step above the Swimmey 12 and is a common choice for small to medium private pools with a compact plant room.

Pentair’s data shows 11 m of head at 100 l/min, 8.5 m at 150 l/min and 4.5 m at 200 l/min, which gives noticeably more margin than the Swimmey 12 when the filter starts to load up. The Swimmey 15T 415v is the same pump for a three-phase supply. The Swimmey 12M is the next size down (210 l/min) and the Swimmey 19M is the next size up (310 l/min).

Every Swimmey is a close-coupled, self-priming centrifugal pump with an integral pre-filter. The pump body and pre-filter are ABS, the impeller and diffuser are glass-fibre reinforced Lexan to resist abrasion from sand, and the large polyethylene strainer basket sits under a clear Lexan cover that you unscrew by hand to empty it. A graphite and ceramic mechanical seal and a stainless steel shaft with an insulating element complete the wet end. The 2850 rpm motor is IPX5 rated with class F insulation and self-lubricating ball bearings, and is suitable for continuous duty. Suction and delivery connections are DN 50.

It runs on a standard 230v single-phase supply and draws 3.0 A. The motor has a permanently connected run capacitor and a thermal cut-out built into the winding, so it protects itself if it overheats. Pentair requires an earthed supply protected by a 30 mA residual current device.

Features

• Self-priming, with up to 3 m recommended suction lift using a foot valve
• Integral pre-filter with large strainer basket and clear hand-tightened cover
• Up to 250 l/min (about 15 m³/h) maximum flow
• 11 m head at 100 l/min and 4.5 m at 200 l/min
• 0.5 kW motor, 230v single-phase, 3.0 A, thermal cut-out in the winding
• IPX5 motor, class F insulation, rated for continuous duty
• ABS body with glass-fibre reinforced Lexan impeller and diffuser
• DN 50 suction and delivery connections
• Weight 8.5 kg

Applications

• Small to medium private pools
• Pools where a Swimmey 12 struggles with filter resistance
• Like-for-like replacement of an existing Swimmey 15
• Circulation and filtration through sand or cartridge filters

Pentair rates the Swimmey for chlorine-treated pool water up to 40°C, a maximum operating pressure of 2.5 bar and a maximum ambient temperature of 45°C. It is a surface pump, not a submersible: install it in a dry, ventilated place, protected from frost, with isolating valves on both sides and a non-return valve after the pump. Never run it dry, and do not use it for flammable or hazardous liquids. If your pool uses salt or another treatment, talk to us before ordering.

Performance curve and dimensions

Dimensions for the Swimmey 15 in mm (A to F as on the drawing above):

The Pentair Swimmey range

Flow and head are from Pentair’s published performance data, and the M and T versions of each size perform the same. See the Pentair Swimmey range page for help choosing a size, or browse all swimming pool pumps.