Description
The Matra Venus 180 (code 022-792) is a high-pressure 4-inch submersible borehole pump for clean water. Its single brass peripheral impeller and 1.33 kW (1.8 HP) motor give 87 metres of head at 5 litres per minute, 69 metres at 20 l/min and 48 metres at 30 l/min, with flow up to 50 l/min. It runs on 230v single-phase mains and delivers through a 1″ G outlet.
This is the pump to choose when the water level is deep, the delivery pipe climbs a long way, or you want good pressure at the outlets from a borehole supply. At every flow it gives roughly twice the head of the Matra Venus 100, which shares the same 98 mm body and suits lighter irrigation work.
Both Venus models share the same construction. The pump body and the single peripheral impeller are brass, the outer shell and shaft are AISI 304 stainless steel, and the shaft is sealed by a graphite/ceramic mechanical seal. The motor is oil-cooled, runs at 2900 rpm and has Class B insulation. A non-return valve is built into the pump, and the outlet is a 1″ G thread. Each pump is supplied with a control box that houses the capacitor and thermal overload protection for the single-phase motor.
The Venus 180 is 500 mm long and 98 mm in diameter, and weighs 18 kg.
Features
- 87 m head at 5 l/min, 69 m at 20 l/min, 48 m at 30 l/min
- Still 28 m of head at 40 l/min; flow up to 50 l/min
- 1.33 kW (1.8 HP) motor, 230v single-phase
- Single brass peripheral impeller for high pressure at low flow
- Built-in non-return valve
- Control box with capacitor and thermal overload protection
- 98 mm diameter for 4-inch boreholes and wells
Applications
- Domestic water supply from a deep borehole, with a pressure vessel
- Irrigation where water must be lifted a long way
- Pumping clean water up a long or steep delivery pipe to a storage tank
The Venus 180 is for clean water only, so it is not suitable for sandy or silty bores, drainage or dirty water. The control box protects the motor but does not start and stop the pump with demand, so an automatic supply also needs a pressure switch and pressure vessel or a level control. Its 98 mm body leaves very little clearance in a 4-inch bore, so measure your casing first; for a 3-inch bore, see the Pentax 3S 3-inch borehole pumps.

The Matra Venus range
| Model | Motor P2 (kW / HP) | Head at 5 l/min (m) | Head at 20 l/min (m) | Head at 30 l/min (m) | Head at 40 l/min (m) | Head at 50 l/min (m) | Length x Dia (mm) | Kg | Code |
|---|---|---|---|---|---|---|---|---|---|
| Matra Venus 100 | 0.75 / 1.0 | 47 | 37 | 25 | 15 | 5 | 460 x 98 | 15 | 022-790 |
| Matra Venus 180 | 1.33 / 1.8 | 87 | 69 | 48 | 28 | 10 | 500 x 98 | 18 | 022-792 |
Both models are 230v single-phase with a 1″ G outlet, for clean water only. See the Matra Venus borehole pumps range page for help choosing a model and answers to common questions.









Reviews
There are no reviews yet.