GMP High Head Self Priming Pump – GTMK-A M EAEN 230v

Description

The GMP GTMK-A EAEN 230v high head self priming pump (code 070-EAEN) is an electric self priming centrifugal pump built for high head, for clean or slightly dirty water. It pumps up to 315 litres per minute and reaches a maximum head of 25 metres from a 1.5 kW motor on 230v single-phase, the standard UK mains supply. It is the entry point to the range, lifting 315 l/min to 25 m.

The GMP G2TMK-A EB53 is the same pump for 400v three-phase. The GMP G2TMK-A EAEL is the next size up, 370 l/min to 33 m.

A self priming pump sits above the water and draws it up the suction hose, lifting from up to 6 metres below the pump. The open impeller design avoids loss of suction, and a non-return valve on the inlet holds water in the casing so the pump re-primes quickly after it stops. The pump casing is cast iron, with a stainless steel shaft and a carbon mechanical seal, and it handles liquids up to 70°C. Inlet and outlet are both 2″.

Features

• Self priming from up to 6 m suction lift
• Up to 315 l/min and 25 m head
• 1.5 kW motor, 230v, 10.5 A
• 2″ x 2″ inlet and outlet
• Solids up to 5 mm
• Non-return valve on the inlet for quick re-priming
• Cast iron casing, stainless steel shaft, carbon mechanical seal

Applications

• Irrigation from a lower water source
• Water transfer to a higher discharge point
• Dewatering where water must be lifted out
• Tank filling and emptying

Suitable for clean or slightly contaminated water free of abrasives, up to 70°C. Not designed for sewage, slurry or flammable liquids.

The GMP High Head Self Priming range

Flow and head are the manufacturer’s published maximums. See the GMP High Head Self Priming range page for help choosing between models and answers to common questions.