GMP HGM Self Priming Cast Iron Dirty Water Pump – B3KQA 1780 230v (HGM3)

Description

The GMP HGM-3 B3KQA 1780 230v self priming dirty water pump (code 070-116) is an electric self priming surface pump in cast iron, for dirty water with solids. It pumps up to 850 litres per minute and reaches a maximum head of 15 metres from a 2.2 kW motor on 230v single-phase, the standard UK mains supply. It is the largest pump in the range, a 3″ pump moving up to 850 l/min for bigger excavations and flooded areas.

The GMP HGM-2 B2KQA 2757 is the smaller option, 390 l/min to 16 m.

The pump sits beside the water and lifts it from up to 6 metres below through the suction hose, so nothing electrical goes into the water. The casing and multi-blade impeller are cast iron, with a stainless steel shaft and carbon mechanical seal, and a non-return valve on the inlet keeps the casing full after it stops so it re-primes quickly.

Features

• Self priming from up to 6 m suction lift
• Up to 850 l/min and 15 m head
• 2.2 kW motor, 230v, 13 A
• 3″ inlet and outlet
• Solids up to 27 mm
• Cast iron casing, stainless steel shaft, carbon mechanical seal
• 32 kg

Applications

• Construction site and excavation dewatering
• Flood clearance and basement pump out
• Irrigation and water transfer
• Hire fleets

Suitable for clean and dirty water with solids. Not designed for flammable liquids, oils or chemicals.

The GMP HGM Self Priming range

Flow and head are the manufacturer’s published maximums. See the GMP HGM Self Priming range page for help choosing between models and answers to common questions.