GMP HGM Self Priming Cast Iron Dirty Water Pump – B1½KQ/A EA5V 230v (HGM1)

Description

The GMP HGM-1 B1½KQA EA5V 230v self priming dirty water pump (code 070-110) is an electric self priming surface pump in cast iron, for dirty water with solids. It pumps up to 290 litres per minute and reaches a maximum head of 16 metres from a 0.75 kW motor on 230v single-phase, the standard UK mains supply. It is the smallest pump in the range, a portable 1½″ pump for domestic flood clearance, small sites and garden irrigation.

The GMP HGM-2 B2KQA 2757 is the next size up, 390 l/min to 16 m.

The pump sits beside the water and lifts it from up to 6 metres below through the suction hose, so nothing electrical goes into the water. The casing and multi-blade impeller are cast iron, with a stainless steel shaft and carbon mechanical seal, and a non-return valve on the inlet keeps the casing full after it stops so it re-primes quickly.

Features

• Self priming from up to 6 m suction lift
• Up to 290 l/min and 16 m head
• 0.75 kW motor, 230v, 6.2 A
• 1½″ inlet and outlet
• Solids up to 8 mm
• Cast iron casing, stainless steel shaft, carbon mechanical seal
• 21 kg

Applications

• Construction site and excavation dewatering
• Flood clearance and basement pump out
• Irrigation and water transfer
• Hire fleets

Suitable for clean and dirty water with solids. Not designed for flammable liquids, oils or chemicals.

The GMP HGM Self Priming range

Flow and head are the manufacturer’s published maximums. See the GMP HGM Self Priming range page for help choosing between models and answers to common questions.