Pentax 3S 3-45 3-Inch 400v Multistage Borehole Pump – 022-926

Pentax 3S 3-45 3-inch multistage borehole pump with 45 impellers and a 1.1 kW motor, 400v three-phase. Up to 45 l/min and 128 m maximum head, with a 1″ G outlet. The highest-head model in the 3S range, for clean water in deep 3-inch wells.

£704.62 +VAT
£845.54 incl VAT

in stock

Free UK delivery
on orders over £200

Need advice?
01252 515169

SKU: 022-926 Categories: ,

Description

The Pentax 3S 3-45 (code 022-926) is the most powerful pump in the Pentax 3S range of 3-inch multistage borehole pumps. Its 45 impellers deliver up to 45 litres per minute and a maximum head of 128 metres from a 1.1 kW (1.5 HP) motor, through a 1″ G outlet. The model we stock is a 400v three-phase pump, so it needs a three-phase supply.

The 3S 3-45 is built for deep 3-inch bores and long, high lifts, typically on farms, estates and commercial sites with three-phase power. It still gives about 103 metres of head at 20 l/min and 75 metres at 30 l/min. If you only have a single-phase supply, the Pentax 3S 3-30 is the highest-head 230v model in the range, at 92 metres.

The pump end has a stainless steel shell, pump shaft and coupling, Noryl impellers and self-lubricating polyacetal diffusers, with a 1″ G threaded outlet. Pentax drives it with a 2-pole asynchronous submersible motor with class F insulation and IP58 protection.

Features

  • 45 impellers, maximum head 128 m, maximum flow 45 l/min
  • About 103 m of head at 20 l/min and 28 m at 45 l/min
  • 1.1 kW (1.5 HP) motor, 400v three-phase
  • Made for 3-inch wells and boreholes
  • Stainless steel shell, shaft and coupling
  • Noryl impellers and self-lubricating polyacetal diffusers
  • 1″ G threaded outlet
  • IP58 motor, class F insulation

Applications

  • Deep 3-inch boreholes on farms and estates
  • Supplying tanks or troughs on high ground
  • Pressurised water systems with a high lift from the bore
  • Irrigation from a deep water table

The 3S 3-45 is for clean water only, with no more than 40 g/m³ of sand. It is not a dirty water or drainage pump and must never run dry, so Pentax recommends level probes to switch it off if the water level falls. It is made for 3-inch wells; in a much wider bore, fit a cooling jacket so water flows past the motor.

Pentax 3S 3 inch multistage borehole pump performance curves, head against flow

The Pentax 3S range

ModelImpellersSupplyMotor (kW)Max Head (m)Head at 20 l/min (m)Head at 45 l/min (m)Code
Pentax 3S 3-1515230v single-phase0.3346367022-920
Pentax 3S 3-2323230v single-phase0.55705513022-922
Pentax 3S 3-3030230v single-phase0.75927317022-924
Pentax 3S 3-4545400v three-phase1.112810328022-926

All four models are rated to 45 l/min with a 1″ G outlet. See the Pentax 3S 3-inch borehole pumps page for help choosing between them and answers to common questions.

Additional information

Flow Rate

0 – 50 l/min

Liquid Type

Clean Water

Material

Stainless Steel

Max Head

121 – 130m

Voltage

400v

Downloads

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Delivery Information

Delivery
We offer free next working day delivery to any UK address on all orders over the value of £200+VAT if ordered before 3pm on weekdays excluding bank holidays. Delivery on orders below this amount is charged at £15+VAT.
For more information please see our Terms and Conditions

Recommended accessories

You may also need

Free, independent advice

Need help choosing? Ask our team

Not sure it is the right pump or motor for the job? Send us a question and our team will reply, or call us now. We have been supplying, repairing and rewinding pumps since 1948.

Monday to Friday, 8.30am to 5.30pm

Send us a question

We reply within one working day.

Loading cart