Pentax 3S 3-30 3-Inch 230v Multistage Borehole Pump

Pentax 3S 3-30 3-inch multistage borehole pump with 30 impellers and a 0.75 kW motor, 230v single-phase. Up to 45 l/min and 92 m maximum head, with a 1″ G outlet. The highest-head single-phase model in the 3S range, for clean water in 3-inch wells.

£636.31 +VAT
£763.57 incl VAT

in stock

Free UK delivery
on orders over £200

Need advice?
01252 515169

SKU: 022-924 Categories: ,

Description

The Pentax 3S 3-30 (code 022-924) is the highest-head single-phase pump in the Pentax 3S range of 3-inch multistage borehole pumps. Its 30 impellers deliver up to 45 litres per minute and a maximum head of 92 metres from a 0.75 kW (1 HP) motor on 230v single-phase, through a 1″ G outlet.

Choose the 3S 3-30 for a deeper 3-inch bore, or where you need to lift water a long way and still have pressure at the tap, on an ordinary single-phase supply. It gives about 73 metres of head at 20 l/min and 57 metres at 30 l/min. If the Pentax 3S 3-23 at 70 metres is enough for your duty, it uses a smaller motor; if you need more head and have a three-phase supply, the Pentax 3S 3-45 reaches 128 metres.

The pump end has a stainless steel shell, pump shaft and coupling, Noryl impellers and self-lubricating polyacetal diffusers, with a 1″ G threaded outlet. Pentax drives it with a 2-pole asynchronous submersible motor with class F insulation and IP58 protection.

Features

  • 30 impellers, maximum head 92 m, maximum flow 45 l/min
  • About 73 m of head at 20 l/min and 17 m at 45 l/min
  • 0.75 kW (1 HP) motor, 230v single-phase
  • Made for 3-inch wells and boreholes
  • Stainless steel shell, shaft and coupling
  • Noryl impellers and self-lubricating polyacetal diffusers
  • 1″ G threaded outlet
  • IP58 motor, class F insulation

Applications

  • Domestic supply from a deep 3-inch borehole
  • Pressure vessel and pressurised water systems
  • Irrigation where the water table is well below ground
  • Pumping to tanks on high ground some distance away

The 3S 3-30 is for clean water only, with no more than 40 g/m³ of sand. It is not a dirty water or drainage pump and must never run dry, so Pentax recommends level probes to switch it off if the water level falls. It is made for 3-inch wells; in a much wider bore, fit a cooling jacket so water flows past the motor.

Pentax 3S 3 inch multistage borehole pump performance curves, head against flow

The Pentax 3S range

ModelImpellersSupplyMotor (kW)Max Head (m)Head at 20 l/min (m)Head at 45 l/min (m)Code
Pentax 3S 3-1515230v single-phase0.3346367022-920
Pentax 3S 3-2323230v single-phase0.55705513022-922
Pentax 3S 3-3030230v single-phase0.75927317022-924
Pentax 3S 3-4545400v three-phase1.112810328022-926

All four models are rated to 45 l/min with a 1″ G outlet. See the Pentax 3S 3-inch borehole pumps page for help choosing between them and answers to common questions.

Additional information

Voltage

230v

Flow Rate

0 – 50 l/min

Max Head

91 – 100m

Material

Stainless Steel

Liquid Type

Clean Water

Downloads

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Delivery Information

Delivery
We offer free next working day delivery to any UK address on all orders over the value of £200+VAT if ordered before 3pm on weekdays excluding bank holidays. Delivery on orders below this amount is charged at £15+VAT.
For more information please see our Terms and Conditions

Recommended accessories

You may also need

Free, independent advice

Need help choosing? Ask our team

Not sure it is the right pump or motor for the job? Send us a question and our team will reply, or call us now. We have been supplying, repairing and rewinding pumps since 1948.

Monday to Friday, 8.30am to 5.30pm

Send us a question

We reply within one working day.

Loading cart