Description
The Pentax DTRT 400 400v (code 020-660) is a three-phase submersible high head sewage grinder pump with a 3 kW (4 HP) motor drawing 7.5 A at 400v and a DN50 flanged outlet. Pentax rates it to a maximum head of 33.5 metres, 28.5 metres at 150 litres per minute and 21.6 metres at 300 litres per minute.
It is the first model in the larger DTRT body, a clear step up from the 26.1 metre DTRT 300 400v. If your duty sits close to the limit, the DTRT 550 400v uses the same body and DN50 flange but adds 5 to 6 metres of head across the curve.
The pump body and impeller are cast iron with a cataphoresis paint finish, the grinder is treated stainless steel and the motor shaft is AISI 304 stainless steel. A double mechanical seal with an oil barrier (silicon carbide on the pump side, ceramic and graphite on the motor side) protects the two-pole motor, which has class F insulation and is rated for immersion to 20 metres. The pump stands on a galvanised foot support and comes with 10 metres of H07RN-F cable. There is no float switch, so the pump runs under a separate control panel or level control.
Run it from a three-phase motor starter or control panel with overload protection, which also gives you a way to add level control with float switches.
The DN50 outlet flange is drilled to UNI PN10 (four 18 mm holes on a 125 mm pitch circle). You will need a matching DN50 counter flange to connect pipework; call us and we will confirm the right one. Pentax also lists a DN50 quick-coupling kit as an accessory for its flanged DTRT pumps.
Features
- Open impeller with treated stainless steel grinder for suspended solids and fibres
- Maximum head 33.5 m; 28.5 m at 150 l/min; 21.6 m at 300 l/min
- 3 kW (4 HP) motor, 400v three phase, 7.5 A
- DN50 flanged outlet to UNI PN10
- Cast iron pump body and impeller
- Double mechanical seal with oil barrier
- 10 m H07RN-F cable
Applications
- Commercial and industrial pumping stations with long rising mains
- Sites where the discharge point is well above the sump
- Civil and municipal sewage with suspended solids and fibres
- Livestock and agricultural waste water
For sewage and waste water with soft suspended solids and fibres, at liquid temperatures from 0 to 40 °C. Not for flammable liquids, oils, solvents or chemicals, and not for installations deeper than 20 metres. Ask us before using it on water carrying sand, gravel or other abrasive material.
The Pentax DTR and DTRT range
| Model | Supply | Motor (kW) | Current (A) | Outlet | Max Head (m) | Head at 150 l/min (m) | Head at 300 l/min (m) | Code |
|---|---|---|---|---|---|---|---|---|
| DTR 150 | 230v 1~ | 1.1 | 11.5 | 2″ G | 19.4 | 16.0 | 9.9 | 020-650 |
| DTR 200 | 230v 1~ | 1.5 | 13.6 | 2″ G | 22.1 | 19.1 | 13.4 | 020-652 |
| DTRT 150 | 400v 3~ | 1.1 | 4.4 | 2″ G | 19.4 | 16.0 | 9.9 | 020-654 |
| DTRT 200 | 400v 3~ | 1.5 | 5.1 | 2″ G | 22.1 | 19.1 | 13.4 | 020-656 |
| DTRT 300 | 400v 3~ | 2.2 | 5.8 | 2″ G | 26.1 | 23.3 | 18.2 | 020-658 |
| DTRT 400 | 400v 3~ | 3.0 | 7.5 | DN50 flange | 33.5 | 28.5 | 21.6 | 020-660 |
| DTRT 550 | 400v 3~ | 4.0 | 9.2 | DN50 flange | 38.6 | 33.9 | 27.6 | 020-662 |
| DTRT 750 | 400v 3~ | 5.5 | 13.9 | DN65 flange | 47.8 | 42.7 | 36.1 | 020-664 |
| DTRT 1000 | 400v 3~ | 7.5 | 15.5 | DN65 flange | 54.6 | 49.2 | 42.7 | 020-666 |
Head figures are from Pentax’s 50 Hz performance data. See the Pentax DTR high head sewage grinder pump range page for help choosing between models.
Reviews
There are no reviews yet.