Pentax DCT210 400v High Head Centrifugal Pump

Three-phase version of the DC 210, giving up to 650 l/min and a maximum head of 23 m from a 1.5 kW, 400v motor drawing 5.9 A. Cast iron body and impeller, double mechanical seal in oil, 2″ side outlet and 10 m cable.

£834.34 +VAT
£1,001.21 incl VAT

in stock

Free UK delivery
on orders over £200

Need advice?
01252 515169

Description

The Pentax DCT 210 400v (code 020-636) is a heavy-duty submersible centrifugal drainage pump for high head work. It reaches a maximum head of 23.0 metres and delivers up to 650 litres per minute from a 1.5 kW (2 hp) motor, through a 2″ threaded outlet, running on 400v three-phase at 5.9 A.

The DCT 210 shares its pump end and curve with the single-phase Pentax DC 210 230v: 20.7 metres at 200 l/min, 15.9 metres at 400 l/min and up to 650 l/min at low head, at 5.9 A instead of 16.5 A. Step down to the Pentax DCT 160 400v for lighter lifts, or up to the Pentax DCT 310 400v for 26.4 metres from the same compact frame.

Like every pump in the Pentax DC range, it has a cast iron pump body and impeller, an AISI 304 stainless steel motor shaft and a double mechanical seal in an oil chamber, with silicon carbide faces on the pump side and ceramic and graphite on the motor side. The two-pole motor has class F insulation and IPX8 protection, comes with 10 metres of power cable, and Pentax rates it for submersion to 20 metres in liquid from 0 to 40 °C. The pump stands freely on a galvanised base with a side outlet.

Features

  • 1.5 kW (2 hp) motor, 400v three-phase, 5.9 A
  • Maximum head 23 m, maximum flow 650 l/min
  • 2″ threaded side outlet
  • Cast iron pump body and impeller
  • Double mechanical seal in an oil chamber
  • 10 m power cable

Applications

  • Commercial and industrial drainage pits on three-phase power
  • Lifting water from basements, culverts and lift shafts
  • Transferring drainage water over long pipe runs
  • Construction site water with fine solids up to 10 mm

Suitable for clean and dirty water with solids up to 10 mm, up to 40 °C. Not designed for sewage, rag or fibrous material, or for flammable or corrosive liquids, and never run it dry. The pump has no float switch; for automatic operation, wire it through a starter or control panel with overload protection and level float switches. See our float switches and pump controls.

Pentax DC and DCT high head submersible drainage pump range

The Pentax DC range

ModelVoltageOutletMax Flow (l/min)Max Head (m)Motor (kW)Current (A)Weight (kg)Code
DC 160230v2″ G60018.91.113.837020-630
DC 210230v2″ G65023.01.516.537.5020-632
DCT 160400v2″ G60018.91.14.837020-634
DCT 210400v2″ G65023.01.55.937.5020-636
DCT 310400v2″ G70026.42.26.937020-638
DCT 410400vDN50 flange80033.838.960.5020-640
DCT 560400vDN50 flange85038.7410.763.5020-642
DCT 750400vDN65 flange90047.65.515.391020-644
DCT 1000400vDN65 flange90055.17.517.593.5020-646

Flow and head are Pentax’s published 50 Hz maximums; max head is at zero flow. See the Pentax DC range page for help choosing a model and answers to common questions.

Additional information

Voltage

400v

Flow Rate

601 – 650 l/min

Max Head

21 – 30m

Material

Cast Iron

Liquid Type

Clean Water, Dirty Water

Downloads

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Delivery Information

Delivery
We offer free next working day delivery to any UK address on all orders over the value of £200+VAT if ordered before 3pm on weekdays excluding bank holidays. Delivery on orders below this amount is charged at £15+VAT.
For more information please see our Terms and Conditions

Recommended accessories

You may also need

Free, independent advice

Need help choosing? Ask our team

Not sure it is the right pump or motor for the job? Send us a question and our team will reply, or call us now. We have been supplying, repairing and rewinding pumps since 1948.

Monday to Friday, 8.30am to 5.30pm

Send us a question

We reply within one working day.

Loading cart