Pentax DC High Head Centrifugal Pumps

The Pentax DC range is a family of heavy-duty submersible centrifugal drainage pumps built for high head work, where water has to be lifted a long way or pushed along a long pipe run. Pentax designed them for very heavy civil and industrial use, and they handle clean water and dirty water carrying solids up to 10 mm.

The pump body and impeller are cast iron, the motor shaft is AISI 304 stainless steel, and a double mechanical seal running in an oil chamber protects the motor, with silicon carbide faces on the pump side and ceramic and graphite on the motor side. Every model has a side outlet, a 10 metre power cable, an IPX8 motor with class F insulation, and can work submerged to a depth of 20 metres in water up to 40 °C.

Choosing the right DC or DCT model

The letters tell you the supply. A DC model runs on 230v single-phase mains and comes with an external capacitor, while a DCT model runs on 400v three-phase. Only the 1.1 kW and 1.5 kW sizes are made in both versions, so from the DCT 310 upwards you need a three-phase supply.

The number rises with motor size and head. The DC 160, DC 210 and DCT 310 share a compact frame with a 2″ threaded outlet and reach between 18.9 and 26.4 metres. The DCT 410 and DCT 560 step up to a DN50 flanged outlet and up to 38.7 metres, and the DCT 750 and DCT 1000 use a DN65 flange and reach 47.6 and 55.1 metres.

To choose, work out the total head your system needs at the flow you want, then pick the smallest model whose curve covers that duty point. A pump that only just reaches your height will deliver very little water.

ModelVoltageOutletMax Flow (l/min)Max Head (m)Motor (kW)Current (A)Code
DC 160230v single-phase2″ G60018.91.113.8020-630
DC 210230v single-phase2″ G65023.01.516.5020-632
DCT 160400v three-phase2″ G60018.91.14.8020-634
DCT 210400v three-phase2″ G65023.01.55.9020-636
DCT 310400v three-phase2″ G70026.42.26.9020-638
DCT 410400v three-phaseDN50 flange80033.838.9020-640
DCT 560400v three-phaseDN50 flange85038.7410.7020-642
DCT 750400v three-phaseDN65 flange90047.65.515.3020-644
DCT 1000400v three-phaseDN65 flange90055.17.517.5020-646

Max head is the shut-off head at zero flow, and max flow is reached at low head, so the two never happen together. Click through to any model for its full duty figures.

Showing all 9 results

Where to Use Pentax DC High Head Pumps

These pumps suit drainage jobs where an ordinary sump or puddle pump runs out of lift. Typical examples are emptying deep pits, tanks and flooded basements up to ground level and beyond, clearing water from excavations and lift shafts, and moving surface water across a site to a distant drain. If you are new to the basics, our guide to what a drainage pump is explains how they differ from sewage and clean water pumps.

Size the pump on the total head, which is the vertical lift plus the friction losses in the hose or pipe. A long run of narrow hose can add many metres of head on its own, so keep the delivery line at least the size of the outlet. Our guides to pump head and flow rate and discharge pipe size show how to work it out.

The DC range is a drainage pump, not a sewage pump. For foul water from toilets, use the Pentax DTR grinder pumps or another pump from our sewage pump range. If the pump needs to sit dry beside the water rather than in it, the surface-mounted Pentax CR handles soft solids and the Pentax CM suits clean water at higher pressure.

Frequently Asked Questions

Can the pump give its maximum flow and maximum head at the same time?

No. The maximum head is the height at which flow falls to zero, and the maximum flow is only reached near the bottom of the curve. The DC 160, for example, pumps 300 l/min at 14.3 metres but only 3 metres at 600 l/min. Check the duty figures on each product page, or read our guide on how to read a pump curve.

Do Pentax DC pumps have a float switch?

No, they are supplied without a float, so they run whenever power is on. For automatic operation, wire the pump through a control panel with level float switches, which also gives the motor overload protection. Our float switch guide explains the options.

Can I fit the pump on a guide rail?

The models we list are the freestanding versions, which sit on a galvanised base for portable or temporary use. Pentax also builds coupling-foot versions of the DCT 410, DCT 560, DCT 750 and DCT 1000 for permanent pit installations on guide rails. Call us if you need one of these.

What liquids can a DC pump handle?

Pentax rates the range for clean and dirty water with solids up to 10 mm, at liquid temperatures from 0 to 40 °C. They are not designed for sewage, rag or fibrous material, or for flammable or corrosive liquids.

Can I run a DCT pump on a single-phase supply?

Not directly. DCT motors are three-phase and need a 400v supply with a suitable starter. If you only have 230v single-phase, choose the DC 160 or DC 210, which are the single-phase equivalents of the DCT 160 and DCT 210 and give the same flow and head.

If you would like help sizing a Pentax DC or DCT pump for a deep pit, long pipe run or site drainage job, call the AES Rewinds team on 01252 515169 or email sales@aesrewinds.com. You can also browse all drainage pumps or the full Pentax range.

Free, independent advice

Need help choosing? Ask our team

Not sure it is the right pump or motor for the job? Send us a question and our team will reply, or call us now. We have been supplying, repairing and rewinding pumps since 1948.

Monday to Friday, 8.30am to 5.30pm

Send us a question

We reply within one working day.

Loading cart