Description
The JS RSD-400 230v (code 012-400) is a professional residue puddle pump for mains-powered jobs in buildings. It drains flood water down to approximately 1 mm, delivering up to 190 litres per minute with a maximum head of 11.5 metres from a 0.4 kW motor. It runs on a standard 230v single-phase supply, drawing 2.8 A, and pumps through a 1¼” BSP female outlet with a stepped hose tail for 25 mm, 19 mm or 15 mm hose. It comes with 10 metres of power cable.
If you work from a site transformer, the RSD-400 110v is the same pump with the same performance on a 110v supply. For lighter domestic jobs, the plastic-bodied RSD 150 Puddle Buddy is smaller and easier to carry.
The RSD-400 is built for professional use. The outer case, motor case and shaft are stainless steel, and the motor lid, pump casing and volute are cast iron, with a plastic impeller. Twin mechanical seals with carbon ceramic and silicon carbide faces run in a lubricated chamber, and the bottom plate is cushioned rubber so the pump does not damage tank bases or finished floors. A non-return valve on the suction side stops water running back when the pump stops. The pump has to be primed if used in shallow water.
This is a manual pump that runs whenever it is switched on. For automatic running in a basement or lift pit, fit the Crab low level sensor, which detects water on the floor and starts and stops the pump after adjustable delays, or use a MATIC Utility 15 panel with the MATIC puddle sensor.
Features
- Drains water down to approximately 1 mm
- 0.4 kW motor, 230v single phase, 2.8 A
- Up to 190 l/min and 11.5 m head
- 1¼” BSP female outlet with 25 / 19 / 15 mm stepped hose tail
- Stainless steel outer case, motor case and shaft
- Cast iron motor lid, pump casing and volute; plastic impeller
- Twin mechanical seals (carbon ceramic and silicon carbide) in a lubricated chamber
- Non-return valve on the suction side
- Cushioned rubber bottom plate
- Maximum solids 2 mm
- Manual operation, 10 metres of power cable
Applications
- Flooded basements, cellars and plant rooms in buildings
- Lift pits and lift shafts
- Clearing the last of the water after a larger drainage pump
- Tank bases and floor slabs
- Nuisance water in commercial and residential properties
Not for sewage, sludge, silt-laden site water or liquids containing oil or chemicals: the RSD-400 is a clean water residue pump with a 2 mm solids limit. On a building site supplied through a 110v transformer, choose the 110v model instead.

The JS RSD-400 range
| Model | Supply | Outlet | Max Flow (l/min) | Max Head (m) | Motor (kW) | Current (A) | Code |
|---|---|---|---|---|---|---|---|
| RSD-400 230v | 230v | 1¼” BSP female | 190 | 11.5 | 0.4 | 2.8 | 012-400 |
| RSD-400 110v | 110v | 1¼” BSP female | 190 | 11.5 | 0.4 | 5.6 | 012-402 |
See the full JS RSD-400 residue puddle pump range for more on choosing and using these pumps.







Reviews
There are no reviews yet.