Description
The Dreno Compatta 32M (code 200-0026) is a cast iron submersible sewage pump with a vortex impeller, for raw sewage, foul water and effluent. It pumps up to 480 litres per minute and reaches a maximum head of 10 metres from a 0.75 kW motor on 230v single-phase, the standard domestic and light commercial supply. It sits one step above the 22 Series, with the extra head for a longer rising main or a higher discharge point from a domestic or small commercial lifting station.
This is the manual version: it runs whenever it has power, so it needs an external float switch or level controller if it is going to be left to run on its own. Manual models suit installations with their own control panel, duty and standby pairs, and supervised pumping out. Dreno Compatta 32T is the same pump on a 400v three-phase supply. Dreno Compatta 32TG is the 400v automatic version. The Dreno Compatta 4M is the next size up, 510 l/min to 13 m.
The vortex impeller sits back from the inlet and moves the liquid by spinning it, so solids up to 40 mm pass through without touching the impeller blades. That is why the Compatta copes with sewage that would block a standard drainage pump. The pump body, motor casing and impeller are GG20 cast iron, with a mechanical seal on the pump side and a lip seal on the motor side. It has a 2″ outlet, 10 metres of power cable, and can be submerged to 20 metres. Maximum liquid temperature is 40°C. For a permanent chamber, the Dreno Easy B guide rail kit (code 200-0432) lets the pump be lifted out for servicing without entering the chamber.
Features
- Vortex impeller passing solids up to 40 mm
- GG20 cast iron pump body, motor casing and impeller
- 0.75 kW motor, 230v single-phase, 5.2 A
- Up to 480 l/min and 10 m head
- 2″ outlet
- Manual operation, for use with an external float switch or control panel
- 10 metres of power cable, 20 m maximum immersion
Applications
- Domestic and commercial sewage lifting stations
- Septic tank and cesspit emptying
- Foul water and effluent transfer
- Basement and below-ground WC drainage
Suitable for sewage, foul water and dirty water with soft solids. Not designed for abrasive slurries, flammable liquids or liquids above 40°C.
The Dreno Compatta range
| Model | Supply | Operation | Max Flow (l/min) | Max Head (m) | Motor (kW) | Current (A) | Solids (mm) | Kg | Code |
|---|---|---|---|---|---|---|---|---|---|
| Compatta 22M | 230v | Manual | 420 | 8 | 0.56 | 3.6 | 40 | 15 | 200-0020 |
| Compatta 22T | 400v | Manual | 420 | 8 | 0.56 | 1.7 | 40 | 15 | 200-0022 |
| Compatta 22TG | 400v | Automatic | 420 | 8 | 0.56 | 1.7 | 40 | 15 | 200-0023 |
| Compatta 32M | 230v | Manual | 480 | 10 | 0.75 | 5.2 | 40 | 17 | 200-0026 |
| Compatta 32T | 400v | Manual | 480 | 10 | 0.75 | 1.9 | 40 | 17 | 200-0028 |
| Compatta 32TG | 400v | Automatic | 480 | 10 | 0.75 | 1.9 | 40 | 17 | 200-0029 |
| Compatta 4M | 230v | Manual | 510 | 13 | 1.1 | 7.6 | 50 | 19 | 200-0032 |
| Compatta 4T | 400v | Manual | 510 | 13 | 1.1 | 2.9 | 50 | 19 | 200-0034 |
| Compatta 4TG | 400v | Automatic | 510 | 13 | 1.1 | 2.9 | 50 | 19 | 200-0031 |
| Compatta 55MG | 230v | Automatic | 540 | 15 | 1.5 | 9.9 | 50 | 21 | 200-0035 |
| Compatta 55TG | 400v | Automatic | 540 | 15 | 1.5 | 3.9 | 50 | 21 | 200-0039 |
Flow and head are Dreno’s published maximums. See the Dreno Compatta range page for help choosing between models and answers to common questions.
Reviews
There are no reviews yet.