Description
The TEC T3C IE3 15 kW 4 pole three-phase motor is a cast iron IE3 premium efficiency induction motor in IEC frame size 160 (frame reference 160L-4), foot and flange mounted (B35). It gives 15 kW at 1,450 rpm on a 415v three-phase supply and has a 42 mm diameter, 110 mm long output shaft.
B35 means foot and flange mounted: as well as the feet, the drive end has a large flange with clearance holes, for close coupling to pumps and gearboxes while the motor is still supported on its feet. The same motor is also available B3 foot mounted.
As a 4 pole motor it has a synchronous speed of 1,500 rpm and runs at 1,450 rpm at full load. For a different speed at the same power, see the 15 kW 2 pole (2,940 rpm) and 15 kW 6 pole (960 rpm) versions. The IEC frame size sets the fixing dimensions, so the shaft centre height on the feet is 160 mm and this motor fits the same mounting as any other IEC 160 frame motor with the same mounting type.
The TEC T3C range has a cast iron body for heavier industrial duty and meets IE3 premium efficiency. It gives higher starting torque with a lower starting current, and its stator laminations are cold-rolled silicon steel, which magnetises evenly and keeps the winding temperature rise down. It is dimensionally interchangeable with standard IEC motors, the same length as or shorter than many motors it replaces, and it is IP55 rated with PTC thermistors fitted.
Features
- 15 kW output, 1,450 rpm at full load
- 4 pole, 415v three-phase
- IEC 160 frame (160L-4)
- B35 foot and flange mounted
- 42 mm x 110 mm output shaft
- IE3 premium efficiency, cast iron body
- IP55, PTC thermistors fitted
- Higher starting torque, lower starting current
Applications
- Pumps and fans
- Conveyors
- Air compressors
- Mining and quarry plant
- Agricultural and process machinery
To replace an existing motor, match the kW, number of poles (speed), frame size and mounting from its rating plate. Check the supply voltage and connection (star or delta) before wiring.
Specification
| Model | TEC T3C IE3 15 kW 4 pole |
|---|---|
| Output | 15 kW |
| Poles | 4 |
| Full load speed | 1,450 rpm |
| Frame size | IEC 160 |
| Frame reference | 160L-4 |
| Mounting | B35 foot and flange mounted |
| Shaft | 42 mm x 110 mm |
| Supply | 415v three-phase |
| Efficiency | IE3 (premium efficiency) |
| Body | Cast Iron |
| Protection | IP55, PTC thermistors |
TEC T3C 4 pole B35 foot and flange mounted motors
| Model | Output (kW) | Frame | Speed (rpm) | Shaft (mm) |
|---|---|---|---|---|
| 0.75 kW 802-4 | 0.75 | 802-4 | 1,420 | 19 x 40 |
| 1.1 kW 90S-4 | 1.1 | 90S-4 | 1,430 | 24 x 50 |
| 1.5 kW 90L-4 | 1.5 | 90L-4 | 1,430 | 24 x 50 |
| 2.2 kW 100L1-4 | 2.2 | 100L1-4 | 1,430 | 28 x 60 |
| 3 kW 100L2-4 | 3 | 100L2-4 | 1,435 | 28 x 60 |
| 4 kW 112M-4 | 4 | 112M-4 | 1,440 | 28 x 60 |
| 5.5 kW 132S-4 | 5.5 | 132S-4 | 1,440 | 28 x 80 |
| 7.5 kW 132M-4 | 7.5 | 132M-4 | 1,440 | 28 x 80 |
| 11 kW 160M-4 | 11 | 160M-4 | 1,450 | 42 x 110 |
| 15 kW 160L-4 | 15 | 160L-4 | 1,450 | 42 x 110 |
| 18.5 kW 180M-4 | 18.5 | 180M-4 | 1,460 | 48 x 110 |
| 22 kW 180L-4 | 22 | 180L-4 | 1,460 | 48 x 110 |
| 30 kW 200L-4 | 30 | 200L-4 | 1,470 | 55 x 110 |
| 37 kW 225S-4 | 37 | 225S-4 | 1,470 | 60 x 140 |
| 45 kW 225M-4 | 45 | 225M-4 | 1,470 | 60 x 140 |
| 55 kW 250M-4 | 55 | 250M-4 | 1,470 | 60 x 140 |
| 220 kW 355M1-4 | 220 | 355M1-4 | 1,480 | 100 x 210 |
See all three-phase motors.


Reviews
There are no reviews yet.