Pentair Jung Pumpen Omnia 200/8 Manual 230v Pump

The largest Omnia stainless steel vortex pump, for dirty water with soft solids up to 20 mm. Rated 200 l/min and 8 m head from a 0.5 kW, 230v motor, 1¼” outlet, manual operation. 10 m cable and hose connector, 8.5 kg.

£437.59 +VAT
£525.11 incl VAT

in stock

Free UK delivery
on orders over £200

Need advice?
01252 515169

Description

The Pentair Jung Pumpen Omnia 200/8 Manual 230v (code 555-043) is the largest Omnia stainless steel vortex pump. It is rated at 200 litres per minute and 8 metres of head from a 0.5 kW motor (0.75 kW input, 3.2 A), with a 1¼” outlet, on 230v single-phase mains.

It holds its flow best as the lift increases: Jung Pumpen’s data shows about 157 l/min at 2 metres, 103 l/min at 4 metres and still around 50 l/min at 6 metres. As a manual pump it runs whenever powered. The Omnia 200/8 Automatic 230v adds a float switch, the Omnia 200/8 Manual 110v is the site-voltage version, and the Omnia 160/7 Manual 230v is the next size down.

Like every pump in the range, it has a pump housing, motor housing and vortex impeller in AISI 304 stainless steel, with an AISI 416 stainless steel shaft, self-lubricating ball bearings and an oil chamber. The motor is cooled by a heat exchange chamber, so the pump can run for long periods without being fully submerged, down to a depth of 7 metres. It comes with 10 metres of H07RN-F cable and a 32 mm hose connector for the 1¼” outlet. The motor runs at 2850 rpm, is IP68 rated with Class F insulation, and has thermal protection built into the winding that resets automatically.

Features

  • Vortex impeller passes soft solids up to 20 mm
  • AISI 304 stainless steel pump body, motor housing and impeller
  • 0.5 kW motor, 230v, 3.2 A, thermal protection
  • Rated 200 l/min and 8 m; about 103 l/min at 4 m head
  • Primes from about 96 mm of water and pumps down to 35 mm
  • Manual operation: runs whenever powered (add a float switch for unattended use)
  • 10 m H07RN-F cable and 32 mm hose connector
  • 338 mm tall, 8.5 kg

Applications

  • Flooded cellars, basements and garages
  • Deeper sumps with a high discharge point
  • Emptying tanks and light industrial pits
  • Larger fountains and water features

The 200/8 is still a 1¼” dirty water pump. For larger volumes, bigger solids or sewage, look at a larger-bore pump.

For rainwater, drain water and waste water with soft solids up to 20 mm, at up to 40°C. Not for raw sewage or toilet waste (use the Priox sewage pumps), stones, rag or fibrous material, or flammable or dangerous liquids. The pump must never run dry.

Pentair Jung Omnia stainless steel vortex pump dimensions drawing

The Omnia range

ModelVersionsRated Flow (l/min)Rated Head (m)Flow at 2 m (l/min)Flow at 4 m (l/min)Motor P1 / P2 (kW)Current 230v (A)Height (mm)Kg
Omnia 80/5230v or 110v, manual or automatic80553120.3 / 0.21.42646.1
Omnia 160/7230v, manual or automatic1507117700.5 / 0.372.53007.0
Omnia 200/8230v or 110v, manual or automatic20081571030.75 / 0.53.23388.5

Duty flows are converted from Jung Pumpen’s published performance data, and current figures are for the 230v versions. Every Omnia has a 1¼” outlet, 20 mm free passage and a 177 x 182 mm footprint. See the Pentair Jung Omnia stainless steel vortex pump range for help choosing and answers to common questions.

Additional information

Voltage

230v

Flow Rate

151 – 200 l/min

Max Head

0 – 10m

Material

Stainless Steel

Liquid Type

Clean Water, Dirty Water

Downloads

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Delivery Information

Delivery
We offer free next working day delivery to any UK address on all orders over the value of £200+VAT if ordered before 3pm on weekdays excluding bank holidays. Delivery on orders below this amount is charged at £15+VAT.
For more information please see our Terms and Conditions

Recommended accessories

You may also need

Free, independent advice

Need help choosing? Ask our team

Not sure it is the right pump or motor for the job? Send us a question and our team will reply, or call us now. We have been supplying, repairing and rewinding pumps since 1948.

Monday to Friday, 8.30am to 5.30pm

Send us a question

We reply within one working day.

Loading cart