Description
The Pentair Jung Pumpen Omnia 160/7 Automatic 230v (code 555-039) is the float-switched mid-size Omnia stainless steel vortex pump. Pentair rates it at up to 150 litres per minute and 7 metres of head from a 0.37 kW motor (0.5 kW input, 2.5 A), with a 1¼” outlet, on 230v single-phase mains.
Its float switch starts the pump at about 320 mm and stops it at about 107 mm, according to Jung Pumpen, which makes it a good unattended pump for a domestic cellar or basement sump with enough depth for the float to work. The Omnia 160/7 Manual 230v is the same pump without the float; for a bigger inflow or higher lift, step up to the Omnia 200/8 Automatic 230v.
Like every pump in the range, it has a pump housing, motor housing and vortex impeller in AISI 304 stainless steel, with an AISI 416 stainless steel shaft, self-lubricating ball bearings and an oil chamber. The motor is cooled by a heat exchange chamber, so the pump can run for long periods without being fully submerged, down to a depth of 7 metres. It comes with 10 metres of H07RN-F cable and a 32 mm hose connector for the 1¼” outlet. The motor runs at 2850 rpm, is IP68 rated with Class F insulation, and has thermal protection built into the winding that resets automatically.
Features
- Integral float switch: starts at about 320 mm, stops at about 107 mm
- Vortex impeller passes soft solids up to 20 mm
- AISI 304 stainless steel pump body, motor housing and impeller
- 0.37 kW motor, 230v, 2.5 A, thermal protection
- Up to 150 l/min and 7 m; about 117 l/min at 2 m head
- 10 m H07RN-F cable and 32 mm hose connector
- 300 mm tall, 7.0 kg
Applications
- Unattended cellar and basement sumps
- Rainwater collection pits
- Groundwater ingress chambers
- Plant room and lift pit drainage
Allow at least 320 mm of water depth in the pit for the float to start the pump, and keep starts under 30 an hour. Available in 230v only.
For rainwater, drain water and waste water with soft solids up to 20 mm, at up to 40°C. Not for raw sewage or toilet waste (use the Priox sewage pumps), stones, rag or fibrous material, or flammable or dangerous liquids. The pump must never run dry.

The Omnia range
| Model | Versions | Rated Flow (l/min) | Rated Head (m) | Flow at 2 m (l/min) | Flow at 4 m (l/min) | Motor P1 / P2 (kW) | Current 230v (A) | Height (mm) | Kg |
|---|---|---|---|---|---|---|---|---|---|
| Omnia 80/5 | 230v or 110v, manual or automatic | 80 | 5 | 53 | 12 | 0.3 / 0.2 | 1.4 | 264 | 6.1 |
| Omnia 160/7 | 230v, manual or automatic | 150 | 7 | 117 | 70 | 0.5 / 0.37 | 2.5 | 300 | 7.0 |
| Omnia 200/8 | 230v or 110v, manual or automatic | 200 | 8 | 157 | 103 | 0.75 / 0.5 | 3.2 | 338 | 8.5 |
Duty flows are converted from Jung Pumpen’s published performance data, and current figures are for the 230v versions. Every Omnia has a 1¼” outlet, 20 mm free passage and a 177 x 182 mm footprint. See the Pentair Jung Omnia stainless steel vortex pump range for help choosing and answers to common questions.








Reviews
There are no reviews yet.