Description
The Pentair Jung Pumpen Omnia 200/8 Automatic 110v (code 555-048) is the largest Omnia stainless steel vortex pump, with a float switch and 110v supply for site use. It is rated at 200 litres per minute and 8 metres of head from a 0.5 kW motor, with a 1¼” outlet.
Jung Pumpen gives float levels of about 351 mm to start and 111 mm to stop for the 200/8 automatic, so it can keep a deeper pit or basement clear on its own between site visits. The Omnia 200/8 Manual 110v is the same pump without the float, the Omnia 200/8 Automatic 230v is the mains version, and the Omnia 80/5 Automatic 110v is the smaller automatic 110v pump.
Like every pump in the range, it has a pump housing, motor housing and vortex impeller in AISI 304 stainless steel, with an AISI 416 stainless steel shaft, self-lubricating ball bearings and an oil chamber. The motor is cooled by a heat exchange chamber, so the pump can run for long periods without being fully submerged, down to a depth of 7 metres. It comes with 10 metres of H07RN-F cable and a 32 mm hose connector for the 1¼” outlet.
Features
- 110v for site transformers
- Integral float switch: starts at about 351 mm, stops at about 111 mm
- Vortex impeller passes soft solids up to 20 mm
- AISI 304 stainless steel pump body, motor housing and impeller
- 0.5 kW motor
- Rated 200 l/min and 8 m; about 103 l/min at 4 m head
- 10 m H07RN-F cable and 32 mm hose connector, 8.5 kg
Applications
- Unattended pits and basements on construction sites
- Lift pits and service chambers on 110v supplies
- Overnight groundwater control
- Temporary drainage during refurbishment
The pit needs at least 351 mm of water depth for the float to start the pump. Ask us for the 110v current draw when sizing a transformer.
For rainwater, drain water and waste water with soft solids up to 20 mm, at up to 40°C. Not for raw sewage or toilet waste (use the Priox sewage pumps), stones, rag or fibrous material, or flammable or dangerous liquids. The pump must never run dry.

The Omnia range
| Model | Versions | Rated Flow (l/min) | Rated Head (m) | Flow at 2 m (l/min) | Flow at 4 m (l/min) | Motor P1 / P2 (kW) | Current 230v (A) | Height (mm) | Kg |
|---|---|---|---|---|---|---|---|---|---|
| Omnia 80/5 | 230v or 110v, manual or automatic | 80 | 5 | 53 | 12 | 0.3 / 0.2 | 1.4 | 264 | 6.1 |
| Omnia 160/7 | 230v, manual or automatic | 150 | 7 | 117 | 70 | 0.5 / 0.37 | 2.5 | 300 | 7.0 |
| Omnia 200/8 | 230v or 110v, manual or automatic | 200 | 8 | 157 | 103 | 0.75 / 0.5 | 3.2 | 338 | 8.5 |
Duty flows are converted from Jung Pumpen’s published performance data, and current figures are for the 230v versions. Every Omnia has a 1¼” outlet, 20 mm free passage and a 177 x 182 mm footprint. See the Pentair Jung Omnia stainless steel vortex pump range for help choosing and answers to common questions.








Reviews
There are no reviews yet.