JS JST-55SV 4″ 400v Sewage Vortex Submersible Pump

Three-phase cast iron sewage vortex pump, 400v, 4″ outlet. Up to 2,650 l/min and 14 m head from a 5.5 kW motor. Outlet removable for guide rail installation.

£1,806.55 +VAT
£2,167.86 incl VAT

in stock

Free UK delivery
on orders over £200

Need advice?
01252 515169

Description

The JS JST-55 SV 400v sewage vortex pump (code 012-788) is a three-phase submersible sewage pump with a cast iron vortex impeller, for sewage, effluent and dirty water with soft solids. It pumps up to 2,650 litres per minute and reaches a maximum head of 14 metres from a 5.5 kW motor on 400v three-phase, a three-phase supply, drawing less current than a single-phase motor of the same size. It is a 4 pole, 4″ pump for large volumes of sewage and effluent, at 2,650 l/min.

The JS JST-75 SV is the next size up, 3,175 l/min to 15.5 m.

The vortex impeller sits back from the inlet and spins the liquid, so soft solids pass through the volute without wrapping round the impeller. The pump body and impeller are cast iron, with a stainless steel shaft, and twin mechanical seals (carbon ceramic and silicon carbide) run in a lubricated oil chamber to protect the motor. The side vertical outlet can be removed so the pump sits on a coupling foot and guide rails in a permanent chamber, or the pump can stand freely on the floor of a sump. It comes with 10 metres of power cable. As a 400v pump it is wired through a control panel or starter with motor protection, and needs float switches or level control for automatic running.

Features

  • Cast iron vortex impeller for soft solids
  • Up to 2650 l/min and 14 m head
  • 5.5 kW motor, 400v three-phase, 11.5 A
  • 4″ side vertical outlet, removable for a coupling foot
  • Twin mechanical seals in a lubricated oil chamber
  • Stainless steel shaft, cast iron body
  • 10 metres of power cable

Applications

  • Commercial and industrial sewage pumping stations
  • Effluent and foul water chambers
  • Hotel, leisure and commercial kitchen wastewater
  • Site drainage carrying debris

Suitable for sewage, effluent and dirty water with soft solids. Not designed for abrasive slurries, flammable liquids or rag-heavy waste that needs a cutter or grinder pump.

JS JST SV sewage vortex pump performance curves

The JS JST SV range

ModelSupplyOutletMax Flow (l/min)Max Head (m)Motor (kW)Current (A)H x W x D (mm)KgCode
JST-4 SV400v2″2508.50.41.1415 x 140 x 28015.4012-698
JST-8 SV400v3″45080.751.8470 x 170 x 34529.4012-768
JST-15 SV400v3″720121.53.2515 x 170 x 35736.6012-774
JST-22 SV 2 pole400v3″1000182.24.6580 x 210 x 43052.2011-026
JST-22 SV 4 pole400v3″130082.24.6650 x 255 x 48059.6011-025
JST-37 SV (80 mm)400v3″1370123.77.9660 x 255 x 48061.2011-040
JST-37 SV (57 mm)400v3″1235233.77.9660 x 255 x 48061.2011-052
JST-55 SV400v4″2650145.511.5830 x 310 x 650125012-788
JST-75 SV400v4″317515.57.515.2830 x 310 x 650135012-792

Flow and head are the manufacturer’s published maximums. See the JS JST SV range page for help choosing between models and answers to common questions.

Additional information

Voltage

400v

Flow Rate

1000 l/min +

Max Head

11- 20m

Material

Cast Iron

Liquid Type

Clean Water, Dirty Water

Downloads

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Delivery Information

Delivery
We offer free next working day delivery to any UK address on all orders over the value of £200+VAT if ordered before 3pm on weekdays excluding bank holidays. Delivery on orders below this amount is charged at £15+VAT.
For more information please see our Terms and Conditions

Recommended accessories

You may also need

Free, independent advice

Need help choosing? Ask our team

Not sure it is the right pump or motor for the job? Send us a question and our team will reply, or call us now. We have been supplying, repairing and rewinding pumps since 1948.

Monday to Friday, 8.30am to 5.30pm

Send us a question

We reply within one working day.

Loading cart