Description
The JS Pumps JS-400SS 230v (code 011-308) is the 2″ all-rounder of the JS Drainer range. This 316 stainless steel submersible drainage pump delivers up to 240 litres per minute and a maximum head of 11.5 metres from a 0.4 kW motor, through a 2″ outlet, on standard 230v single-phase mains.
For a 110v transformer supply, choose the JS-400SS 110v. If you need to lift further, the JS-750SS 230v keeps the 2″ outlet but reaches 16 m of head; for a lighter duty the JS-250SS 230v gives 200 l/min through 1½”.
Every pump in the JS Drainer SS range has its outer construction precision cast in 316 stainless steel, including the pump body and impeller. The O-rings are Viton, and mechanical seals and an oil seal keep liquid out of the motor. The pump is supplied with 10 metres of power cable. It is a manual pump, so it runs whenever the power is on. For automatic running it can be fitted with a MAC3 float switch; allow roughly 300 mm of clear space around the pump for the float to move.
Features
- Precision cast 316 stainless steel outer construction
- Stainless steel pump body and impeller
- Viton O-rings, mechanical seals and oil seal
- 0.4 kW motor, 230v single phase supply
- Up to 240 l/min and 11.5 m head
- 2″ outlet
- Maximum solids size 6 mm
- Manual operation
- 10 metres of power cable
Applications
- Sumps and pits holding seawater
- Industrial wash-down sumps with light chemical waste
- Clean and dirty water drainage where cast iron would corrode
- Emptying tanks and chambers on mains power
Not for sewage, rag, wipes or fibrous solids: the maximum solids size is 6 mm, so use the SK SS stainless cutter range for corrosive effluent with solids. Check chemical compatibility with 316 stainless steel and Viton before use, and do not use it for flammable liquids.

The JS Drainer SS range
| Model | Supply | Outlet | Max Flow (l/min) | Max Head (m) | Motor (kW) | Code |
|---|---|---|---|---|---|---|
| JS-250SS 230v | 230v single phase | 1½” | 200 | 9.5 | 0.25 | 011-300 |
| JS-250SS 110v | 110v single phase | 1½” | 200 | 9.5 | 0.25 | 011-304 |
| JS-400SS 230v | 230v single phase | 2″ | 240 | 11.5 | 0.4 | 011-308 |
| JS-400SS 110v | 110v single phase | 2″ | 240 | 11.5 | 0.4 | 011-312 |
| JS-750SS 230v | 230v single phase | 2″ | 295 | 16 | 0.75 | 011-320 |
| JS-750SS 110v | 110v single phase | 2″ | 295 | 16 | 0.75 | 011-324 |
| JS-1500SS 230v | 230v single phase | 3″ | 485 | 18 | 1.5 | 011-328 |
| JST-8SS | 400v three phase | 2″ | 295 | 16 | 0.75 | 011-332 |
| JST-15SS | 400v three phase | 3″ | 465 | 17.5 | 1.5 | 011-336 |
| JST-22SS | 400v three phase | 3″ | 780 | 21 | 2.2 | 011-340 |
| JST-37SS | 400v three phase | 4″ | 965 | 24 | 3.7 | 011-344 |
| JST-55SS | 400v three phase | 4″ | 1,920 | 26 | 5.5 | 011-348 |
| JST-75SS | 400v three phase | 6″ | 2,065 | 35.5 | 7.5 | 011-352 |
Maximum flow is at zero head and maximum head is at zero flow. See the JS Drainer 316 stainless steel pumps range page for advice on choosing a model and answers to common questions.










Reviews
There are no reviews yet.