Description
The TEC T3A IE3 1.5 kW 4 pole three-phase motor is an aluminium IE3 premium efficiency induction motor in IEC frame size 90 (frame reference 90L1-4), foot and flange mounted (B35). It gives 1.5 kW at 1,430 rpm on a 415v three-phase supply and has a 24 mm diameter, 50 mm long output shaft.
B35 means foot and flange mounted: as well as the feet, the drive end has a large flange with clearance holes, for close coupling to pumps and gearboxes while the motor is still supported on its feet. The same motor is also available B34 foot and face mounted and B3 foot mounted.
As a 4 pole motor it has a synchronous speed of 1,500 rpm and runs at 1,430 rpm at full load. For a different speed at the same power, see the 1.5 kW 2 pole (2,900 rpm) and 1.5 kW 6 pole (955 rpm) versions. The IEC frame size sets the fixing dimensions, so the shaft centre height on the feet is 90 mm and this motor fits the same mounting as any other IEC 90 frame motor with the same mounting type.
The TEC T3A range has a lightweight aluminium body and meets IE3 premium efficiency, built to current European mechanical and electrical standards for wet and dusty conditions. It is wound for dual voltage, rated for 50 and 60 Hz, and has inverter-rated insulation, so it can run from a variable speed drive. The temperature rise is Class B (110°C), it is rated for continuous duty (S1), and it has a sheet metal fan cover, an aluminium terminal box with metric cable gland entries and a gasket, and a PTC thermistor in each phase for overheat protection.
Features
- 1.5 kW output, 1,430 rpm at full load
- 4 pole, 415v three-phase
- IEC 90 frame (90L1-4)
- B35 foot and flange mounted
- 24 mm x 50 mm output shaft
- IE3 premium efficiency, aluminium body
- IP55, PTC thermistors fitted
- Inverter-rated insulation, 50/60 Hz
- Continuous duty S1, Class B temperature rise
Applications
- Pumps and fans
- Packing and processing machinery
- Hydraulic power packs
- Air handling and air conditioning
- Agricultural equipment
To replace an existing motor, match the kW, number of poles (speed), frame size and mounting from its rating plate. Check the supply voltage and connection (star or delta) before wiring.
Specification
| Model | TEC T3A IE3 1.5 kW 4 pole |
|---|---|
| Output | 1.5 kW |
| Poles | 4 |
| Full load speed | 1,430 rpm |
| Frame size | IEC 90 |
| Frame reference | 90L1-4 |
| Mounting | B35 foot and flange mounted |
| Shaft | 24 mm x 50 mm |
| Supply | 415v three-phase |
| Efficiency | IE3 (premium efficiency) |
| Body | Aluminium |
| Protection | IP55, PTC thermistors |
TEC T3A 4 pole B35 foot and flange mounted motors
| Model | Output (kW) | Frame | Speed (rpm) | Shaft (mm) |
|---|---|---|---|---|
| 0.75 kW 802-4 | 0.75 | 802-4 | 1,440 | 19 x 40 |
| 1.1 kW 90S-4 | 1.1 | 90S-4 | 1,440 | 24 x 50 |
| 1.5 kW 90L1-4 | 1.5 | 90L1-4 | 1,430 | 24 x 50 |
| 2.2 kW 100L1-4 | 2.2 | 100L1-4 | 1,450 | 28 x 60 |
| 3 kW 100L2-4 | 3 | 100L2-4 | 1,450 | 28 x 60 |
| 4 kW 112M1-4 | 4 | 112M1-4 | 1,450 | 28 x 60 |
| 5.5 kW 132S-4 | 5.5 | 132S-4 | 1,460 | 38 x 80 |
| 7.5 kW 132M1-4 | 7.5 | 132M1-4 | 1,460 | 38 x 80 |
See all three-phase motors.


Reviews
There are no reviews yet.