Description
The TEC T3C IE3 0.75 kW 6 pole three-phase motor is a cast iron IE3 premium efficiency induction motor in IEC frame size 90 (frame reference 90S-6), foot and flange mounted (B35). It gives 0.75 kW at 935 rpm on a 415v three-phase supply and has a 24 mm diameter, 50 mm long output shaft.
B35 means foot and flange mounted: as well as the feet, the drive end has a large flange with clearance holes, for close coupling to pumps and gearboxes while the motor is still supported on its feet. The same motor is also available B34 foot and face mounted and B3 foot mounted.
As a 6 pole motor it has a synchronous speed of 1,000 rpm and runs at 935 rpm at full load. For a different speed at the same power, see the 0.75 kW 2 pole (2,880 rpm) and 0.75 kW 4 pole (1,420 rpm) versions. The IEC frame size sets the fixing dimensions, so the shaft centre height on the feet is 90 mm and this motor fits the same mounting as any other IEC 90 frame motor with the same mounting type.
The TEC T3C range has a cast iron body for heavier industrial duty and meets IE3 premium efficiency. It gives higher starting torque with a lower starting current, and its stator laminations are cold-rolled silicon steel, which magnetises evenly and keeps the winding temperature rise down. It is dimensionally interchangeable with standard IEC motors, the same length as or shorter than many motors it replaces, and it is IP55 rated with PTC thermistors fitted.
Features
- 0.75 kW output, 935 rpm at full load
- 6 pole, 415v three-phase
- IEC 90 frame (90S-6)
- B35 foot and flange mounted
- 24 mm x 50 mm output shaft
- IE3 premium efficiency, cast iron body
- IP55, PTC thermistors fitted
- Higher starting torque, lower starting current
Applications
- Pumps and fans
- Conveyors
- Air compressors
- Mining and quarry plant
- Agricultural and process machinery
To replace an existing motor, match the kW, number of poles (speed), frame size and mounting from its rating plate. Check the supply voltage and connection (star or delta) before wiring.
Specification
| Model | TEC T3C IE3 0.75 kW 6 pole |
|---|---|
| Output | 0.75 kW |
| Poles | 6 |
| Full load speed | 935 rpm |
| Frame size | IEC 90 |
| Frame reference | 90S-6 |
| Mounting | B35 foot and flange mounted |
| Shaft | 24 mm x 50 mm |
| Supply | 415v three-phase |
| Efficiency | IE3 (premium efficiency) |
| Body | Cast Iron |
| Protection | IP55, PTC thermistors |
TEC T3C 6 pole B35 foot and flange mounted motors
| Model | Output (kW) | Frame | Speed (rpm) | Shaft (mm) |
|---|---|---|---|---|
| 0.75 kW 90S-6 | 0.75 | 90S-6 | 935 | 24 x 50 |
| 1.1 kW 90L-6 | 1.1 | 90L-6 | 940 | 24 x 50 |
| 1.5 kW 100L-6 | 1.5 | 100L-6 | 940 | 28 x 60 |
| 2.2 kW 112M-6 | 2.2 | 112M-6 | 940 | 28 x 60 |
| 3 kW 132S-6 | 3 | 132S-6 | 940 | 28 x 80 |
| 4 kW 132M1-6 | 4 | 132M1-6 | 950 | 28 x 80 |
| 5.5 kW 132M2-6 | 5.5 | 132M2-6 | 950 | 28 x 80 |
| 7.5 kW 160M-6 | 7.5 | 160M-6 | 960 | 42 x 110 |
| 11 kW 160L-6 | 11 | 160L-6 | 960 | 42 x 110 |
| 15 kW 180L-6 | 15 | 180L-6 | 960 | 48 x 110 |
| 18.5 kW 200L1-6 | 18.5 | 200L1-6 | 970 | 55 x 110 |
| 22 kW 200L2-6 | 22 | 200L2-6 | 970 | 55 x 110 |
| 30 kW 225M-6 | 30 | 225M-6 | 975 | 60 x 140 |
| 37 kW 250M-6 | 37 | 250M-6 | 975 | 60 x 140 |
| 45 kW 280S-6 | 45 | 280S-6 | 980 | 75 x 140 |
| 55 kW 280M1-6 | 55 | 280M1-6 | 980 | 75 x 140 |
| 220 kW 355L1-6 | 220 | 355L1-6 | 980 | 100 x 210 |
See all three-phase motors.


Reviews
There are no reviews yet.