GMP EA Stainless Steel Self-Priming Acidic Pump – B3XR-A/X T EALS 400v

Description

The GMP B3XR-A/X T EALS 400v stainless steel self priming pump (code 070-EALS) is an electric self priming surface pump built in stainless steel, for acidic water, dilute acids and food-grade liquids. It pumps up to 1,450 litres per minute and reaches a maximum head of 30 metres from a 7.5 kW motor on 400v three-phase, a three-phase supply, drawing less current than a single-phase motor of the same size. It is the largest pump in the range, moving up to 1,450 l/min at up to 30 m.

The GMP B3XR-A/X T EALR is the smaller option, 1,400 l/min to 26 m.

The pump casing, inlet flange, impeller and shaft are all stainless steel, so it can handle liquids that would attack a cast iron pump. It sits on the surface and lifts from up to 6 metres below, with a non-return valve on the inlet to keep it primed between cycles and an inspection door for clearing obstructions. It handles liquids up to 70°C, and a silicon carbide seal is available on request for more aggressive duties.

Features

• Stainless steel casing, impeller and shaft
• Up to 1450 l/min and 30 m head
• 7.5 kW motor, 400v, 14.3 A
• 3″ inlet and outlet
• Solids up to 24 mm
• Self priming from up to 6 m, non-return valve on the inlet
• Inspection door for clearing obstructions

Applications

• Acidic water and dilute acid transfer
• Fruit juice and liquid foodstuffs
• Effluent and process water
• Sewage transfer

Check chemical compatibility with us before pumping concentrated acids or solvents. Not suitable for flammable liquids.

The GMP EA Stainless Steel Self Priming range

Flow and head are the manufacturer’s published maximums. See the GMP EA Stainless Steel Self Priming range page for help choosing between models and answers to common questions.