Pentair Flotec VIP 130-6 Automatic Drainage Pump

Automatic 230v submersible drainage pump with float switch, moving up to 130 l/min with a maximum head of 6 metres from a 320 W power input. Suited to cellar sumps and rainwater drainage, with a 1¼” outlet and 10 m cable.

£174.01 +VAT
£208.81 incl VAT

in stock

Free UK delivery
on orders over £200

Need advice?
01252 515169

Description

The Pentair Flotec VIP 130/6 Automatic (code 020-072) is a 230v submersible drainage pump with a float switch, moving up to 130 litres per minute and lifting water up to 6 metres. It has a 320 W power input and a 1¼” male outlet.

The tethered float switch starts the pump as the water rises and stops it at about 150 mm, so it can be left in a sump to empty it whenever it fills. It is the same pump as the VIP 130/6 Manual, which has no float and pumps lower but needs someone to switch it off. If water comes in faster or has further to rise, step up to the VIP 180/7 Automatic.

The pump body is polypropylene, which keeps the weight down and will not rust, and the motor shaft has a ceramic sleeve where it wears. The pump draws 230v single-phase power, comes with 10 metres of cable, and can be submerged to a depth of 7 metres. A carry handle on top lets you lower it into a pit or lift it out, and the 1¼” male outlet takes the hose connector supplied.

Features

  • Up to 130 l/min and 6 metres maximum head
  • Float switch for automatic operation
  • 320 W power input, 230v single-phase
  • Passes particles up to 6 mm
  • Polypropylene pump body and ceramic sleeved motor shaft
  • 1¼” male outlet with hose connector supplied
  • 10 metres of cable

Applications

  • Cellar and basement sumps
  • Rainwater and infiltration water drainage
  • Domestic waste water from utility and plant rooms
  • Keeping low areas and pits clear after heavy rain

This is a drainage pump for clean to moderately dirty water with particles up to 6 mm. It is not for sewage, sludge or water carrying grit, leaves or rag, and Pentair states it must never run dry. It is also not suitable for sea water, swimming pools, or flammable, corrosive or explosive liquids, and the liquid must not exceed 35°C. Allow no more than 30 starts an hour. For dirty water with larger solids, choose the VIPVORT 180/6.

Performance curves for the Flotec VIP 130/6, VIP 180/7 and VIPVORT 180/6 drainage pumps

The Flotec VIP and VIPVORT Range

ModelCodeOperationMax Flow (l/min)Max Head (m)Power Input (W)Max Solids (mm)
VIP 130/6 Manual020-070Manual13063206
VIP 130/6 Automatic020-072Float switch13063206
VIP 180/7 Automatic020-076Float switch18073706
VIPVORT 180/6 Automatic020-086Float switch1806480Ask us

See the full Pentair Flotec VIP and VIPVORT drainage pump range to compare every model.

Additional information

Voltage

230v

Flow Rate

101 – 150 l/min

Max Head

0 – 10m

Material

Plastic, Stainless Steel

Liquid Type

Clean Water, Dirty Water

Downloads

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Delivery Information

Delivery
We offer free next working day delivery to any UK address on all orders over the value of £200+VAT if ordered before 3pm on weekdays excluding bank holidays. Delivery on orders below this amount is charged at £15+VAT.
For more information please see our Terms and Conditions

Frequently bought with this item

You may also need

Need help? Got a question?

Give us a call on 01252 515169, email or Fill out the form below and we will be in touch.

Loading cart