AES Rewinds Logo
ο’‹

Free Delivery over Β£200

ο‡š

Shop 24 Hours a day

JS GS-1500 230v Manual Sewage Submersible Pump

High-head single-phase sewage grinder pump, manual operation, 230v, 1ΒΌ” outlet. Lifts to 22 m with up to 190 l/min maximum flow from a 1.5 kW motor (12 A), for long or steep small-bore rising mains.

£797.08 +VAT
£956.50 incl VAT

in stock

Description

The JS Pumps GS-1500 230v Manual (code 020-707) is the high-head model in the single-phase GS grinder range. Its 1.5 kW motor lifts sewage to 22 metres of head, with a maximum flow of 190 litres per minute through a 1ΒΌ” outlet, after a cutter and high-chrome grinder ring have shredded the soft solids. It runs on 230v mains and draws 12 A.

Choose it over the GS-1200 230v Manual when the rising main is long or the discharge point is high: the extra 3 metres of head means it holds more of its flow as the load increases. As a manual pump it needs a float switch or control panel in a fixed sump; the GS-1500 230v Automatic has a MAC 3 float switch fitted. At 12 A it uses most of a standard 13 A circuit, so have the supply checked by an electrician.

The pump body, impeller, motor top cover and lower bearing and seal housing are cast iron, and the motor case is stainless steel. Twin mechanical seals (carbon ceramic and silicon carbide) run in a lubricated oil chamber. The side vertical outlet is removable, so the pump can stand free with the hose tail supplied or sit on a guide rail coupling foot for easy lifting out. It comes with 10 metres of power cable.

Features

  • Highest head in the single-phase GS range: up to 22 m
  • Up to 190 l/min maximum flow
  • 1.5 kW motor, 230v single phase, 12 A
  • High-chrome cutter and grinder ring, rated by JS Pumps at up to 28,000 cuts per minute
  • 1ΒΌ” (32 mm) side vertical outlet with hose tail
  • Twin mechanical seals in an oil chamber
  • Free standing or guide rail mounted
  • Manual operation for use with a control panel

Applications

  • Long rising mains from outbuildings or remote properties
  • Pumping to a sewer well above the sump
  • Commercial basements controlled from a panel
  • Upgrading a GS-1200 installation that struggles with the head

Designed for sewage and waste water containing soft solids. Not suitable for sand, gravel, stones or other hard debris, which wear or jam the cutter, or for oils, solvents, chemicals or flammable liquids.

JS GS-1200 and GS-1500 grinder pump performance curves, head in metres against flow in litres per minute

The JS GS grinder range

ModelVoltageOperationOutletMax Flow (l/min)Max Head (m)Motor (kW)Current (A)Code
GS-1200 230v Manual230vManual1ΒΌ”190191.29.9020-702
GS-1200 230v Automatic230vAutomatic1ΒΌ”190191.29.9020-702A
GS-1200 110v Manual110vManual1ΒΌ”190191.220020-704
GS-1200 110v Automatic110vAutomatic1ΒΌ”190191.220020-704A
GS-1500 230v Manual230vManual1ΒΌ”190221.512020-707
GS-1500 230v Automatic230vAutomatic1ΒΌ”190221.512020-707A

Flow and head are JS Pumps’ published maximums. See the JS GS grinder sewage pump range page for help choosing between models, or the JS GST range for three-phase 400v versions.

Additional information

Voltage

230v

Flow Rate

151 – 200 l/min

Max Head

21 – 30m

Material

Cast Iron

Liquid Type

Sewage

Downloads

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Delivery Information

Delivery
We offer free next working day delivery to any UK address on all orders over the value of Β£200+VAT if ordered before 3pm on weekdays excluding bank holidays. Delivery on orders below this amount is charged at Β£15+VAT.
For more information please see our Terms and Conditions

Products frequently bought with this item

Products related to this item

Need help? Got a question?

Give us a call on 01252 515169, email or Fill out the form below and we will be in touch.